 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Transistor 2SB1209 Silicon PNP triple diffusion planer type For low-frequency amplification Unit: mm 6.90.1 1.5 2.50.1 1.0 s Features q q q 1.5 R0.9 R0.9 0.4 2.40.2 2.00.2 3.50.1 High collector to base voltage VCBO. High collector to emitter voltage VCEO. Low collector to emitter saturation voltage VCE(sat). 1.0 0.450.05 1 1.00.1 R 0. 7 0.85 Parameter Collector to base voltage Collector to emitter voltage Emitter to base voltage Peak collector current Collector current Collector power dissipation Junction temperature Storage temperature * Symbol VCBO VCEO VEBO ICP IC PC* Tj Tstg Ratings -400 -400 -5 -200 -100 1 150 -55 ~ +150 1cm2 Unit V V V mA mA W C C 1:Base 2:Collector 3:Emitter 2.5 2.5 3 2 EIAJ:SC-71 M Type Mold Package Printed circuit board: Copper foil area of thickness of 1.7mm for the collector portion or more, and the board s Electrical Characteristics Parameter Collector to base voltage Collector to emitter voltage Emitter to base voltage Forward current transfer ratio Collector to emitter saturation voltage Base to emitter saturation voltage Transition frequency Collector output capacitance (Ta=25C) Symbol VCBO VCEO VEBO hFE VCE(sat) VBE(sat) fT Cob Conditions IC = -100A, IE = 0 IC = -500A, IB = 0 IE = -100A, IC = 0 VCE = -5V, IC = -30mA IC = -10mA, IB = -1mA IC = -50mA, IB = -5mA VCB = -30V, IE = 20mA, f = 200MHz VCB = -30V, IE = 0, f = 1MHz 50 9 min -400 -400 -5 40 - 0.6 -1.5 V V MHz pF typ max Unit V V V 1.250.05 s Absolute Maximum Ratings (Ta=25C) 0.550.1 4.10.2 4.50.1 1 Transistor PC -- Ta 1.6 -120 Printed circut board: Copper foil area of 1cm2 or more, and the board thickness of 1.7mm for the collector portion. Ta=25C -100 -100 2SB1209 IC -- VCE -120 VCE=-5V 25C IC -- VBE Collector power dissipation PC (W) 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 20 Collector current IC (mA) Collector current IC (mA) Ta=75C -80 -80 -60 - 0.9mA - 0.8mA - 0.7mA - 0.6mA - 0.5mA - 0.4mA IB=-1mA -60 -40 - 0.3mA - 0.2mA -40 -25C -20 -20 - 0.1mA 0 40 60 80 100 120 140 160 0 -2 -4 -6 -8 -10 -12 0 0 - 0.2 - 0.4 - 0.6 - 0.8 -1.0 Ambient temperature Ta (C) Collector to emitter voltage VCE (V) Base to emitter voltage VBE (V) VCE(sat) -- IC Collector to emitter saturation voltage VCE(sat) (V) -100 -30 -10 -3 TC=75C -1 25C -25C IC/IB=10 240 hFE -- IC 120 VCE=-5V fT -- I E VCB=-30V TC=25C Forward current transfer ratio hFE 200 Ta=75C 160 Transition frequency fT (MHz) -10 -30 -100 100 80 120 25C 60 - 0.3 - 0.1 - 0.03 - 0.01 - 0.1 - 0.3 -25C 80 40 40 20 -1 -3 -10 -30 -100 0 - 0.1 - 0.3 0 -1 -3 1 3 10 30 100 300 1000 Collector current IC (mA) Collector current IC (mA) Emitter current IE (mA) Cob -- VCB 30 Area of safe operation (ASO) IE=0 f=1MHz Ta=25C -1000 -300 Single pulse Ta=25C ICP t=100ms IC t=1s -30 -10 -3 -1 t=10ms Collector output capacitance Cob (pF) 25 20 15 10 5 - 0.3 0 1 3 10 30 100 - 0.1 -1 Collector current IC (A) -100 -3 -10 -30 -100 -300 -1000 Collector to base voltage VCB (V) Collector to emitter voltage VCE (V) 2 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR |
Price & Availability of 2SB1209
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |